Thought I'd post my DA. She needs to see the world.

1991 Acura Integra GS

-Engine-
JDM H22A
Explicit Speed Performance DA/H22 mounts
LSD Transmission
NGK Plug Wires and Plugs
ACT Clutch Kit
Intake
Edge Sports 4-2-1 Header
Exhaust

-Exterior-
Brand new Ferrari Red Paintjob
16" Integra Type-R Champ White Replicas
Gorilla Tuner Lug Nuts
JDM 1-Piece headlights
Lip Kit
JDM Thin Moldings
JDM Stanley Side Markers
JDM Taillights
Rear Wiper Delete

-Interior-
Front and Rear Strut Bar
Full Black Leather Interior
JDM Red Stitched Shift Boot
Weighted Shift Knob
Amber Colored Cluster and Climate Control
JDM Center Armrest
Red Sparco Harness with Quick Release Camlock
Clifford Alarm

-Suspension and Brakes-
Tein High Tech Lowering Springs
Brembo Front and Rear Brake Kit
Front and Rear Strut Bars

For pics and more info......
http://www.cardomain.com/ride/3362587

My next thing is finding a good set of GSR Blades and getting rid of the 17's

本田1991 Acura Integra H22A-LSD本田
^Click For Info On Car^

Clean interior

Post the pics here.. you can attach them to your thread.

I'm trying to add attachments, but it's not letting me. I'll just insert them.

本田1991 Acura Integra H22A-LSD本田
^Click For Info On Car^

That's clean! +rep 4 u~!

'07 A/T Milano Red Fit Sport (rebadged jazz)
/\Old Honda Warriors Crew mbr #1

I'm really wondering how many H22 DA's there are out there. I only know of 3 and 1 of those is the one that Explicit Speed Performance owns (they make the DA/H22 mounts)

本田1991 Acura Integra H22A-LSD本田
^Click For Info On Car^

Looks LEGIT!

'07 A/T Milano Red Fit Sport (rebadged jazz)
/\Old Honda Warriors Crew mbr #1

Aye BRO, nice car. I like it alot. How long did it take you to do this, and how is the fitment?

takes about the same time as B-series into a Civic. As far as the fitment, it's a tight squeeze. The intake manifold is about 1/2" from the firewall, and the header clears pretty well.

I'm featured on Explicit Speed Performance's website. They are the ones that made the mounts.

本田1991 Acura Integra H22A-LSD本田
^Click For Info On Car^

Nice car , clean swap....not a huge h22 fan but in a DA i like anything.....props

Are you planing on taking the abs out? i notice that you dont have cruise control and all that, but umm since you said your headers have good clearance, can u still have your ac in their? i dont mind the power steering.

I'm in the process of getting brakes lines from a RS, so I can remove all the ABS. All the A/C stuff is out. I'm currently working on a design so I can mount a power steering pump. There isn't enough clearance for the stock P/S setup. I have to design a bracket, idler pulley and figure out the belt size. The reason for all that is because the power steering part of the crankshaft pulley had to be removed because of fitment issues. I'm going to have to run the P/S pump of the alternator belt and I have to snake it around. Once I get the design figured out, I'm going to try to patent it and sell the design off. Cruise control was the first thing to go.

All of this is part of my engine bay tuck. I'm putting the underhood fuse block behind my glove box where the evaporator box is. I'm going to section off the evaporator box and cut the bottom out and put the fuse block upside down and sticking out the bottom so I still have access to it. Then seal the box around the fuse block.

Then, redo all my vacuum hoses. Once I chip my P28 and get rid of the EGR, Knock Sensor and o2 sensor, I can clean up the engine bay even further.

本田1991 Acura Integra H22A-LSD本田
^Click For Info On Car^

that is clean as fukk!!! +1 rep for you!

Would look so much better with the Blades...I'll keep a look out. ;)

Nice whip. Needs some whoosh noises though

thought I would give a little update.

I've got all the stuff for the ABS delete, the P28, and a spare wiring harness for the engine bay wire tuck. I'm just waiting for warmer weather to get it all done. I also picked up some replica Champ White ITR 4-lug rims for it. Once I get them mounted I'll post some pictures.

I have an idea about installing a electric power steering rack instead of designing a bracket for a stock power steering pump. Right now it's just an idea, but I'm getting a lot of good info together. Might be the first electric power steering rack in a DA.

本田1991 Acura Integra H22A-LSD本田
^Click For Info On Car^

Hmmmm......sounds like a good idea to me. Be sure to make a write up and whatnot. How about pictures with the new wheels?

I'll do a write up when I do it. Might be awhile though.

Once I get some tires on the rims and get them mounted I will get some pics up

本田1991 Acura Integra H22A-LSD本田
^Click For Info On Car^

Word. How's the car been treating you? Been a while since you've been on here.

baller DA; + rep

well i just sold a stripped and polished mint set of blades with honda center caps and new nitto's for 550
lol

Shweet Da!!


I like these 2 doors better then the 4, just got a 91 4 door, awesome shape fer it's age n $800