SearchMember ListCalendarHelp Hello There, Guest! Register


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
2002 CRV VTEC
Author Message
greg184 Offline
Junior Member

2002 Honda CRV VTEC
South Carolina

Posts: 3
Joined: Nov 2009
Reputation: 0
Post: #1
2002 CRV VTEC
I have a problem with the idle ! on my 2002 CRV VTEC

When cold for 2-3 minutes it idles fine, then after that it will surge from 700rpm to 2300 rpm- very quckly. If you place it in gear, it will idle OK.

It has approx 110k on it, had a head job done early this spring, all was fine. Once in awhile a P0341 code comes on ( Camshaft position) I did replace both cam sensors, did not help anything at all. Car runs down the road fine. Don't have alot of money. I did take the Throttlebody off cleaned it, did not take all sensors out of it, but it was cleaned.

Any help is needed !!!!

Thank You !!
11-09-2009 12:51 AM
Find all posts by this user Quote this message in a reply
chiwhitesi Offline
hellafunctional

EP3 (mini Odyssey)
Chicago

Posts: 2,304
Joined: Jul 2008
Reputation: 14
Post: #2
RE: 2002 CRV VTEC
clean the iacv (idle air control valve) then reset the ecu

[Image: white_ep3.png]
8k all day crew #17

Check out my build thread
http://www.redline9.com/forum/thread-2242.html

http://hellafunctional.com/
11-09-2009 01:13 AM
Find all posts by this user Quote this message in a reply
greg184 Offline
Junior Member

2002 Honda CRV VTEC
South Carolina

Posts: 3
Joined: Nov 2009
Reputation: 0
Post: #3
RE: 2002 CRV VTEC
Where is this located ??
11-09-2009 01:19 AM
Find all posts by this user Quote this message in a reply
greg184 Offline
Junior Member

2002 Honda CRV VTEC
South Carolina

Posts: 3
Joined: Nov 2009
Reputation: 0
Post: #4
RE: 2002 CRV VTEC
Where is the IACV located on a 2002 CRV VTEC ???

Is there a thread with pics ??

Thanks !!
11-10-2009 01:44 AM
Find all posts by this user Quote this message in a reply
S-LudeDan Offline
EDM

1996 Honda Prelude S
New York

Posts: 10,374
Joined: Jul 2008
Reputation: 40
Post: #5
RE: 2002 CRV VTEC
It should be behind the throttle body.
You just need a 12mm Ratchet to remove 2 bolts.

see this thread: http://images.google.com/imgres?imgurl=h...N%26um%3D1

[Image: signaturedg.jpg]
11-10-2009 10:06 PM
Visit this user's website Find all posts by this user Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  A Real CR-VTEC - B20VTEC GodspeedCRV 70 2,145 11-18-2009 07:57 PM
Last Post: L3GDKANG/JDM-KANG
  Installation and Parts for an LS/VTEC (FAQ's) GodspeedCRV 17 1,244 05-26-2009 01:16 PM
Last Post: archibaldballer




Home | Contact UsCopyright (C) 2009-2012