anybody installed a lightweight flywheel and racing clutch yet?is there any noise and is it worth the install

ive always been told not to bess with the flywheel and what kind of "racing" clutch are you talking about?

OFFICIAL PART OUT.LOOK:
http://www.redline9.com/forum/thread-2720.html

the build progress
http://www.redline9.com/forum/thread-1527.html

FS: 2 12" Audiobahn Alum q subwoofers
-----pm me

_interlude_ Wrote:ive always been told not to bess with the flywheel and what kind of "racing" clutch are you talking about?

just a clutch with more holding power but i have heard that they make alot of noise just wondering if anybody is running one now

I wanna know what you have done to your TSX that you are considering a racing clutch!? And a flywheel is fine to get if you're doing the clutch anyway however if you are drag racing from a stop you'll lose bottom end torque due to there being less rotating mass. It will also make starting off a little harder (you'll have to rev it higher.) Make sure to use a quality company too since some have been known to fly apart. Exedy is good.